Have questions? Call us Monday through Friday, 9 a.m. to 5 p.m. MST at 480.584.4231

PRODUCTION MOLDS
for
APPENDIX EDC HOLSTERS

APPENDIX EDC
PRODUCTION
MOLDS
APPENDIX EDC Molds are full-featured molds that include cut lines, blocking, retention, and sight channels. Each model is designed to produce a finished holster without additional mold work.

HDPE MOLDS CANNOT
BE USED WITH THE SYSTEM™. CHOOSE UPGRADED MATERIAL FOR THE SYSTEM™ COMPATIBILITY
OPTIONAL
TRIM JIGS
APPENDIX EDC
Matching Trim Jigs are available for all production molds. Trim jigs have brass inserts for #8-32 screws on the retention plates for securing the formed Kydex to the Trim Jig.
OPTIONAL
TRIM JIGS
APPENDIX EDC
The router's bearing rides on the smooth outer edges of the Trim Jigs leaving smooth edges that need very little post sanding or polishing.
THIS PRODUCTION MOLD
makes this APPENDIX EDC HOLSTER

THIS PRODUCTION MOLD
makes an
APPENDIX EDC HOLSTER

01 – PRODUCTION | APPENDIX EDC | SPLIT-BOARD BUTTERFLY FOLD-OVER MOLDS | $95 | Price List

$95.00

SKU: 01 - PRODUCTION | APPENDIX EDC | SPLIT-BOARD BUTTERFLY FOLD-OVER MOLDS Categories: ,

Description

Additional information

Weight 1 lbs
Dimensions 10 × 7 × 4.5 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

FEATURES

  • Suppressor-height sight blocking.
  • Belt clip mount designed for strut and loop configurations so wearer can adjust ride height.  Spacing is .60″ on center. 
  • Detent at trigger guard provides an audible and tactile ‘click’ on draw and reholster.
  • Reliable, adjustable retention plate works in conjunction with trigger detent.  
  • Integral ribbing keeps retention plate flat.
  • Vertical surfaces drafted to aid in mold release.
  • Molds include a .25″ boundary of extra Kydex at the perimeter so it can be rough trimmed, and then production trimmed with a trim jig. 

HDPE MOLDS CANNOT BE USED WITH THE SYSTEM™. CALL FOR DETAILS ON UPGRADED MATERIAL FOR THE SYSTEM™ COMPATIBILITY

Caution! 

There are as many ideas of what makes a perfect holster as there are holster makers.  For instance, there are great arguments for holsters that are open at the muzzle, and equally persuasive arguments for that area being closed. Some folks like retention plates, others don’t.  There’s a myriad of ways to create detent. If you are looking for molds that can be used to create something unique, Production Molds are not for you. The features for Production Molds are not modifiable.  These molds create a very specific set of features.  Attempts to modify these features will result in mold/holster failure.  Download the Hardware List PDF available in the header/footer of every page.  This holster takes a specific hardware package to function properly.

Handing | Right and Left?

During development of EagleWorks Holsters Production Molds, the fellow Holster Makers we consulted stated they did not have enough need to warrant investing in high-volume holster making for left handed holsters.  As a result, the Production Molds, specifically engineered for high volume turnaround, are all right hand molds.   

If you personally have the need for high-volume production of a left hand holster, we can custom develop a mold for you.  The lead time is longer, and a custom mold fee can apply.

If your need for a left-handed holster is occasional, take a look at our Universal Molds which will accommodate positioning a belt clip mount in a location that works for you.