LEARNING | PRODUCTION MOLDS & TRIM JIGS
LEARNING | PRODUCTION MOLDS & TRIM JIGS
step 1
step 2
Preparing
the Molds
How to prepare the mold you receive from EagleWorks Holsters™ for the processes that follow.
HEATINGkydex
An in depth look at heating thermoplastic to achieve the best results when using an EagleWorks Production Mold™.
CAUTION: DANGEROUS TOOLS MUST BE USED WITH CAUTION AND FOCUS.
step 3
step 4
VACUUM FORMING
Step-by-step advice for optimum vacuum forming definition and cooling time for an EagleWorks Production Mold™.
CAUTION: DANGEROUS TOOLS MUST BE USED WITH CAUTION AND FOCUS.
CAUTION: DANGEROUS TOOLS MUST BE USED WITH CAUTION AND FOCUS.
rough
trim
Best practice for rough-trimming the shells formed with an EagleWorks Production Mold™ to get them ready for the next steps.
step 5
step 6
CAUTION: DANGEROUS TOOLS MUST BE USED WITH CAUTION AND FOCUS.
drill
oUT
Recommendations for drilling and chamfering the divots that were created when you vacuum formed your shell.
CAUTION: DANGEROUS TOOLS MUST BE USED WITH CAUTION AND FOCUS.
trim jigs& routers
The drilled-out shell is held in place on the Trim Jig at the post locations. Watch how to trim a Kydex shell with a router bit.
step 7
step 8
CAUTION: DANGEROUS TOOLS MUST BE USED WITH CAUTION AND FOCUS.
first
polish
The methods EagleWorks™ uses to polish the edges of shells trimmed with a router, including doing a production run of several shells at once.
CAUTION: DANGEROUS TOOLS MUST BE USED WITH CAUTION AND FOCUS.
fold
over
The methods EagleWorks™ uses to accurately fold over the shell to get the perfect fit.
step 9
step 10
final trim& polish
A look at the hardware package used to finish EagleWorks IWB and OWB holsters, and best practices for pre-adjusting the retention plate.
CAUTION: DANGEROUS TOOLS MUST BE USED WITH CAUTION AND FOCUS.
retention platehardware
The methods EagleWorks Holsters™ uses for a final trim and polish of the holster shell.
step 11
BELT CLIPSTANDARDS
Every mold type from EagleWorks Holsters™ has been designed with mounting blocks for specific belt clip solutions.
Suddenly, the power to increase your holster-making productivity and profitability is in your hands with EagleWorks Holsters™ Production Molds and Matching Trim Jigs.
Whether you’re a full-time holster maker or a weekend warrior, treat yourself to premium molding tools that support and enhance your power to make a profit and present your customers with premium, hand-crafted products.
Remarkably, your production time per holster will plummet, your accuracy and repeatability will soar, and your customers will treasure the sensational state-of-the art holsters you craft for them.
EagleWorks Holsters & Molds has more than a hundred models available. Don’t see something on the product list you want? Give us a call. We look forward to helping your achieve your goals.
Valid
Email Address Required
100%
free of charge
trusted
knowledge
Questions asked and answered.
at-your-fingertips
reference
When and where
you need it.
All product and company names used on this website are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Some references may appear on this website or product descriptions to trademarks belonging to others not affiliated with EagleWorks™ Holster Product LLC, including references which may not display the ® symbol. All references to other trademarks belonging to third parties or referring to branded products that appear on this website shall be understood to refer to those registered trademarks owned by others, and not to any trademark belong to EagleWorks™.
