PRODUCTION MOLD | OWB Type 1 | KYDEX FORMING | 01
PRODUCTION MOLD | OWB Type 1 | TRIM JIG | 01
HOLSTER | OWB Type 1 COMPETITION | GUN NOT INCLUDED
HOLSTER | OWB Type 1 COMPETITION | GUN NOT INCLUDED

$101.00

  • *MANUFACTURER

    *1911 MODELS

    *BERETTA MODELS

    *BERSA MODELS

    *BROWNING MODELS

    *CZ MODELS

    *EA MODELS

    *FN MODELS

    *GLOCK MODELS

    *H & K MODELS

    *KELTEC MODELS

    *POLYMER 80 MODELS

    *RUGER MODELS

    *SIG SAUER MODELS

    *SMITH & WESSON MODELS

    *SPRINGFIELD MODELS

    *STI MODELS

    *TAURUS MODELS

    *WALTHER MODELS

    TRIM JIG OPTION

    VENT for VACUUM OPTION

    MUZZLE END OPTION

    TRIGGER GUARD FILL OPTION

    RETENTION PLATE RIBS OPTION

    HANDING OPTION

GUARANTEED SAFE CHECKOUT
  • Visa Card
  • MasterCard
  • American Express
  • Discover Card
  • PayPal
  • Apple Pay

Description

MOLD
IWB TYPE 1
MOLD
IWB TYPE 3
MOLD
IWB TYPE 4
MOLD
OWB TYPE 1
MOLD
OWB TYPE 2
MOLD
OWB TYPE 3
Make a Holster
in Ten Minutes
Where to Buy
ModWing Gen 2

REPLACEMENT
TRIM JIGS
are no
longer available.
Please order accordingly.

All EagleWorks™ Production Mold & Trim Jig sets make a specific holster style that requires a specific hardware package to function as designed. A list of recommended hardware, available from many different suppliers, is available in a PDF in the header on every page of the EagleWorks™ website.

INTERNATIONAL
SHIPPING
is not available
at this time

  • The Production Mold and Matching Trim Jig shown on this page will make the fold-over or two-piece Holster Type indicated in the heading above the images.
  • All Production Molds have belt clip blocking to accommodate the recommended belt clip choices that were designed to work with the Holster type.
  • The OWB T1 | Competition Style holster will accommodate most optics.
  • EagleWorks™ Production Molds and Trim Jigs are milled from a solid block of HDPE.
  • Production Molds provide a 0.25" boundary at the perimeter that will be rough trimmed and then finish trimmed with the matching Trim Jig.
  • Production Molds are complete. They require no additional blocking or modifications. All blocking and functionality is built into the mold. Modification of the molds is not recommended.
  • Matching Trim Jigs are available for all Production Molds, both foldover and two-piece.
  • The holster you make with these molds will provide an audible and tactile ‘click’ when a gun is fully reholstered.
  • The holster you make with these molds will provide adjustable retention so your customers will be able to dial in the specific retention that works for them.
  • All Holster Types made with EagleWorks™ Production Molds have standard suppressor-height sight blocking.
  • All Holster Types must be assembled with the recommended hardware to work as designed.