









$161.00

REPLACEMENT
TRIM JIGS
are no
longer available.
Please order accordingly.
TRIM JIGS
are no
longer available.
Please order accordingly.
All EagleWorks™ Production Mold & Trim Jig sets make a specific holster style that requires a specific hardware package to function as designed. A list of recommended hardware, available from many different suppliers, is available in a PDF in the header on every page of the EagleWorks™ website.
INTERNATIONAL
SHIPPING
is not available
at this time
SHIPPING
is not available
at this time
- The Production Mold and Matching Trim Jig shown on this page will make the fold-over or two-piece Holster Type indicated in the heading above the images.
- All Production Molds have belt clip blocking to accommodate the recommended belt clip choices that were designed to work with the Holster type.
- The OWB T1 | Competition Style holster will accommodate most optics.
- EagleWorks™ Production Molds and Trim Jigs are milled from a solid block of HDPE.
- Production Molds provide a 0.25" boundary at the perimeter that will be rough trimmed and then finish trimmed with the matching Trim Jig.
- Production Molds are complete. They require no additional blocking or modifications. All blocking and functionality is built into the mold. Modification of the molds is not recommended.
- Matching Trim Jigs are available for all Production Molds, both foldover and two-piece.
- The holster you make with these molds will provide an audible and tactile ‘click’ when a gun is fully reholstered.
- The holster you make with these molds will provide adjustable retention so your customers will be able to dial in the specific retention that works for them.
- All Holster Types made with EagleWorks™ Production Molds have standard suppressor-height sight blocking.
- All Holster Types must be assembled with the recommended hardware to work as designed.
